Pitting , Hole , Defect on printing

Post Reply
email4walker
Posts: 26
Joined: Mon Mar 16, 2015 10:21 pm

Re: Pitting , Hole , Defect on printing

Post by email4walker » Fri Apr 10, 2015 11:27 pm

Here are some more setting I changed. I slowed down my perimeter print speed, increased my perimeter wall to 4 (number of external layers or shells), and increased my extrusion multiplier to 3. I have learned 3D printing is a trial and error thing. You may need to play with those until you get what you want. I am happy with the results I am getting now.

FYI: I am using Matter Control for my 3D printer software. The other one has the same settings, but the names may be a little different.
20150319_190408.jpg
Before
20150319_190408.jpg (218.98 KiB) Viewed 13720 times
20150410_105500.jpg
After
20150410_105500.jpg (220.89 KiB) Viewed 13720 times
1.1.jpg
Now
1.1.jpg (111.52 KiB) Viewed 13720 times
Top
abulafi
Posts: 15
Joined: Tue Mar 17, 2015 12:34 pm

Re: Pitting , Hole , Defect on printing

Post by abulafi » Sat Apr 11, 2015 6:41 am

This might be an extruder issue, not related to movement. Could you please take some close photos for your extruder or better make a video of your printer while printing. It might be that the extruder screw is too tight or too loose.
Top
begizmo
Posts: 31
Joined: Sat Mar 14, 2015 12:04 am

Re: Pitting , Hole , Defect on printing

Post by begizmo » Sat Apr 11, 2015 9:04 am

Thank email4walker and zhangxueyou.
After I Tighten the Y axis belt , I look better ^_^
only some surface have hole or big spot .
FullSizeRender (62).jpg
FullSizeRender (62).jpg (100.81 KiB) Viewed 13767 times
FullSizeRender (63).jpg
FullSizeRender (63).jpg (95.23 KiB) Viewed 13767 times
FullSizeRender (64).jpg
FullSizeRender (64).jpg (139.76 KiB) Viewed 13767 times
Theo
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Pitting , Hole , Defect on printing

Post by zhangxueyou » Sat Apr 11, 2015 11:46 am

How about tighten the belts more?
Top
begizmo
Posts: 31
Joined: Sat Mar 14, 2015 12:04 am

Re: Pitting , Hole , Defect on printing

Post by begizmo » Sat Apr 11, 2015 12:28 pm

@abulafi
As your advise to check extruder , My Extruder screw is so tight and I try to set them again , It make feed better , Thanks ^^


@zhangxueyou
My Y-axis is loose and I make it more tighter . it make oveall better
Now I test basic cube like photo
FullSizeRender (65).jpg
FullSizeRender (65).jpg (73.45 KiB) Viewed 13751 times
Link : Video
https://drive.google.com/file/d/0B7Vu0J ... sp=sharing

I see only problem in red circle ,other surface is good
I look like when hot end feed in that corner , it is not smooth , trip

Thank
Theo
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Pitting , Hole , Defect on printing

Post by zhangxueyou » Sat Apr 11, 2015 2:09 pm

Have you tried to print with other filament?
Top
begizmo
Posts: 31
Joined: Sat Mar 14, 2015 12:04 am

Re: Pitting , Hole , Defect on printing

Post by begizmo » Sat Apr 11, 2015 3:05 pm

I have only ABS in stock.
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Pitting , Hole , Defect on printing

Post by zhangxueyou » Sat Apr 11, 2015 5:31 pm

Please send me your g-code file.
Top
begizmo
Posts: 31
Joined: Sat Mar 14, 2015 12:04 am

Re: Pitting , Hole , Defect on printing

Post by begizmo » Sun Apr 12, 2015 7:23 pm

This is my cube g-code file with ABS
Attachments
Cube20_hollow.7z
(5.1 KiB) Downloaded 503 times
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Pitting , Hole , Defect on printing

Post by zhangxueyou » Wed Apr 22, 2015 4:06 pm

Maybe this file can help you.
printing influenced by Z axis.zip
(2.46 MiB) Downloaded 714 times
Top
Post Reply

Return to “Others”