Extruder Feeder screws issues

Post Reply
walterfantauzzi
Posts: 6
Joined: Thu May 11, 2017 3:41 am

Extruder Feeder screws issues

Post by walterfantauzzi » Wed Mar 07, 2018 6:08 pm

Hi guys,

So I had an old feeder in plastic and it broke. Now I bought a new feeder in aluminum but inside the kit were not the right screws (blu arrow) to fix the heatsink. The screws are short (green line).

So Where I can buy the screws?

thanks
Walter
Attachments
IMG_4398_low.jpg
IMG_4398_low.jpg (266.24 KiB) Viewed 4925 times
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder Feeder screws issues

Post by William » Thu Mar 08, 2018 6:57 pm

Seems the screw of the pic is fit to the plastic extruder
M3 screw
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Assembly”