Geeetech

hello all,

will someone tell me what the distance between bed and nozzle?
it is a pro Geeetach i3 c. the nozzle size is 2.0

i have read the thickness of a paper ... but there are so many kinds of paper ..
I have a feeler gauge.i would like to know the distance in millimeters.

Sincerely, Marco

The recommended distance between the nozzle and the hotbed is 0.5-1mm.

During adjustment, you can put a piece of A4 paper(half fold it) between the nozzle and hotbed.
If you can feel a bit friction when you pull the paper back and forth, the distance is proper.