Page 1 of 1
cannot install the control board, instruction is not clear
Posted: Fri Jul 17, 2015 11:38 pm
by peter
I bought the Arcylic I3 Pro B, however, the control board is different with the instruction on the Geeetech website, the part # of the control board is GT2560, please email me the detailed instruction how to install this board and how to connect all the cables to this board with clear pictures. On the PSU, there is a yellow warning label for 110V/220V selection , but I do not see any switch to select the voltage. The online instruction has many errors and incomplete, has to be dramatically improved. Do you have technical support in US?
Re: cannot install the control board, instruction is not cle
Posted: Sat Jul 18, 2015 9:30 am
by Sherry
hi,peter.arcylic i3 pro b equipo with 2 different types control board.one is ramps 1.4 ,another is gt2560. and i glance over our wiki page,it's not complete.Thank you for you suggestions, we will improve it later.the instruction for gt2560 has been sent to you mailbox.please check.the 110V/220V selection is in the psu box,you need to use a tool to change the switch.
Re: cannot install the control board, instruction is not cle
Posted: Thu Jul 30, 2015 12:56 pm
by artemarva
Hello, I too have the GT2560 Board. I will need the different instructions as well, please email it to me too.
Re: cannot install the control board, instruction is not cle
Posted: Thu Jul 30, 2015 2:04 pm
by Sherry
artemarva wrote:Hello, I too have the GT2560 Board. I will need the different instructions as well, please email it to me too.
hi,could you tell me your printer type?or you can refer to wiki page:
http://www.geeetech.com/wiki/index.php/GT2560.
Instruction for 13 pro with gt2560 is complete in our website.
Re: cannot install the control board, instruction is not cle
Posted: Fri Apr 01, 2016 10:34 am
by chasedwa
I also need wiring diagram for the gt 2560 printer control board thanks
Re: cannot install the control board, instruction is not cle
Posted: Fri Apr 01, 2016 11:21 am
by Mark