RepRap Sanguinololu Rev 1.3a wirring

Post Reply
wholewind2014
Posts: 3
Joined: Thu Feb 19, 2015 7:46 am

RepRap Sanguinololu Rev 1.3a wirring

Post by wholewind2014 » Thu Feb 19, 2015 7:49 am

Hi, i just done assembling my Acrylic i3 kit. I got RepRap Sanguinololu Rev 1.3a mother board. but i don't know how to wire it. there are 2 y motors but only 1 slot for that. Please help me. An manual instruction would help a lot. Thank you
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: RepRap Sanguinololu Rev 1.3a wirring

Post by zhangxueyou » Wed Mar 11, 2015 4:52 pm

You are wrong. there 1 motor for y axis and 2 for z axis.
There is a slot below the second A4988 module. Can you see that?
Top
Post Reply

Return to “Assembly”