Repetier-Host setting on ABS print
Posted: Mon Oct 04, 2021 11:04 pm
Same as PLA except temperatures.
https://100001.onl/ https://1921681254.mx/
Hotend first 258, then 250 for green, yellow, white, or 245 for gray, red, blue, black
Hotbed first 110 (120 if you can), then 110.
https://100001.onl/ https://1921681254.mx/
Hotend first 258, then 250 for green, yellow, white, or 245 for gray, red, blue, black
Hotbed first 110 (120 if you can), then 110.