A20T-Power-loss-resume not working

[AlexC]

Updated A20T firmware with BL touch successfully, all function OK except no power-lost resume. The printing cannot resume when power back on every time when lost power or turn off the machine. Need to re-start the file. ( when use SD card to print.)

Is it the Firmware problem or can we use G-code to reactivate the power resume function? Please help.

[AlexC]

Just find out I can use the Marlin G-code to activate Power lost resume print function....

Method as below...
Use Repetier Host connect to A20T through USB. on Manual control page input the Gcode as folloowing ....

M413 S1
M500

Then the power lost resume function will come back. Still need to try in detail. Just see the LCD show resume print and not complete an actual print yet.
will keep updating if there is additional findings.

[lipikakapoor1993]

I can't face this problem. I think google can help me. if you don't mind, want to use Banashankari Escorts service within your budget?

[AlexC]

Please do not post unrelated topics and bring reader to un-related links, need administrator attention on the 3rd reply post.

Do not want the technical topic to be used for other purpose.... .