Color mixing software - trojan??

Post Reply
Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Color mixing software - trojan??

Post by Akuma » Sat Dec 08, 2018 7:23 am

Okay why is it after a couple of weeks of having this on my PC has Windows decided that this program has a dangerous trojan??? Screenshot added.
Capture.JPG
Capture.JPG (67.41 KiB) Viewed 19883 times
Someone out there trying to gain access to my PC? :x

Where did this program come from and why is it doing malicious stuff?

Seriously wondering.
:?:

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Color mixing software - trojan??

Post by _kaktus_ » Sat Dec 08, 2018 5:13 pm

Hello.
:mrgreen:

It often happens that code similarity triggers such messages. Then the alarm is false. :roll:

GT team programmers should speak on this subject.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Color mixing software - trojan??

Post by William » Mon Dec 10, 2018 12:05 am

_kaktus_ wrote:
Sat Dec 08, 2018 5:13 pm
Hello.
:mrgreen:

It often happens that code similarity triggers such messages. Then the alarm is false. :roll:

GT team programmers should speak on this subject.
I will contact them and let them know this~
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Re: Color mixing software - trojan??

Post by Akuma » Mon Dec 10, 2018 3:45 am

Thanks. It seems weird that it didn't pick it up when I first installed, but 2 weeks later when I was just starting Windows.

Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Re: Color mixing software - trojan??

Post by Akuma » Fri Dec 14, 2018 4:47 am

Is it because your virus software quaruntined it?
Or is it because at certain times it does indeed have a back door for malicious intent. It's funny how this thread has gone dead since pointing it out.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Color mixing software - trojan??

Post by _kaktus_ » Fri Dec 14, 2018 6:24 am

Hi.
;)

And I think we are waiting for an opinion from programmers.
After all, they have to investigate the problem.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Re: Color mixing software - trojan??

Post by Akuma » Sat Dec 15, 2018 8:31 pm

Well I'm not taking the risk and am not using this software again. The silence from GT is deafening :shock:
I trust Chinese manufacturers as much as I trust the Clintons.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Color mixing software - trojan??

Post by Gingko » Mon Dec 17, 2018 10:34 am

Sorry for late reply, please check again post:
http://www.geeetech.com/forum/viewtopic ... 92&t=61760
We have updated the MD5 code, you can verify yours and compare with it.

Akuma
Posts: 49
Joined: Fri Nov 16, 2018 3:30 am

Re: Color mixing software - trojan??

Post by Akuma » Tue Dec 18, 2018 5:23 am

Thank you for the reply.
I followed your link back to original source again, but not sure if this is the latest version, as it says "Created on 23 Oct" in description?

CHans
Posts: 1
Joined: Mon Jul 08, 2019 1:59 am

Re: Color mixing software - trojan??

Post by CHans » Mon Jul 08, 2019 2:16 am

Hmmm, just downloaded the current version, verified the checksums and uploaded it to virustotal.com for scanning. The screenshots from the scan results are attached. One is for the entire zip file, matching the SHA-256 referred to by Gingko so the file was not infected after downloading. The other one is only for the executable file inside the zip archive.

As the program is supposed to just load an ASCII file and write out a modified one, having several scan engines detecting trojan behaviour is not really inspiring confidence. I conclude that it's either lack of competence or diligence of the programmers or actually a threat. Anyway, I won't use it...
Attachments
GtColorMixerVirus_EXE.png
ColorMixer.exe
GtColorMixerVirus_EXE.png (52.81 KiB) Viewed 16291 times
GtColorMixerVirus.png
colormixerBetaforWin.zip
GtColorMixerVirus.png (59.15 KiB) Viewed 16291 times

Post Reply