USB driver for your printer

[Admin]

Before Install

When you connect your printer to your computer, and your computer can not detect the printer like the picture shows, you need to install the driver for it.

Unknow device.png (38.33 KiB) Viewed 110456 times

The first thing you need to do is check your USB communication chip, there are two type: FT232 and CH340. you can check the chip near the USB port. Usually, FT232 is a square, and CH340 is a rectangle


CH340

CH340.png (788.41 KiB) Viewed 110457 times

FT232

FT232.png (708.31 KiB) Viewed 110457 times

Drivers


Update

you can download from this link:——————————————https://www.geeetech.com/download.html?download_id=40

1.If your USB communication chip is CH340，you can refer to this link.


Windows
Support X86 and X64(Included user instructions)
http://www.wch.cn/download/CH341SER_EXE.html


Mac
Support X86 and X64(Included user instructions)
http://www.wch.cn/download/CH341SER_MAC_ZIP.html


Linux
Support X86 and X64(Included user instructions)
http://www.wch.cn/download/CH341SER_LINUX_ZIP.html

------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------


2.If your USB communication chip is FT232

Installation Guide:
https://www.ftdichip.com/Support/Docume ... Guides.htm

Windows
X86
https://www.ftdichip.com/Drivers/CDM/CD ... tified.zip
X64
https://www.ftdichip.com/Drivers/CDM/CD ... tified.zip



MAC(Mac OS X
10.4 Tiger or later)
https://www.ftdichip.com/Drivers/D2XX/M ... X1.4.4.dmg



Linux
X86(32bit)
https://www.ftdichip.com/Drivers/D2XX/L ... 6-1.4.8.gz
X64(64bit)
https://www.ftdichip.com/Drivers/D2XX/L ... 4-1.4.8.gz

For more info for FT232:
https://www.ftdichip.com/Drivers/D2XX.htm

If the drivers install correctly, you will find these on the device manager:

Drivers work.png (36.56 KiB) Viewed 110453 times

--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
For FT232

FT232-1.png (14.48 KiB) Viewed 110453 times

--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
For CH340

CH340-1.png (14.93 KiB) Viewed 110453 times

[Ali Mir]

thaks dear,

i'll try after test i'll told you feedback

thanks

[Ali Mir]

dear ,
thanks for all

i Succeeded now i can control by from my pc
yesterday i already maked download 3d model from web but printed out said work area . i think it's need setting

can you tell me how i can get model Fits printer settings from web

thanks

[Gingko]

[quote="Ali Mir" post_id=84079 time=1525719313 user_id=65355]
dear ,
thanks for all

i Succeeded now i can control by from my pc
yesterday i already maked download 3d model from web but printed out said work area . i think it's need setting

can you tell me how i can get model Fits printer settings from web

thanks
[/quote]

Which slicer software are you using?
You can adjust it with slicer software, "center" the object, or enter x/y value to change position or even change the scale of the model and so on.

[octaviostyle]

I need the easy print software download link for my MacBook . I keep seeing downloads for windows but no MAC

[yorkie1]

when i click connect on Easy Print the message i get is Access to Com port 3 denied, I have tried all the links on Geeetech none opened for me to install driver.

[_kaktus_]

Hi.


This problem is due to your operating system.
Try to work with administrator privileges.

[yorkie1]

Problem sorted thank you, But one more I hope that can be resolved, When i open EasyPrint 3D it says Download latest Version V1.1.7 I click on it and the bar stays at 0% no matter how long I leave it.

[_kaktus_]

New problem = new topic.

[Astromxhgo]

Hi, I've tried to install my 3D printer I already install the controller and the bus serial is fine.But the problem of "Access to COM Port 3 persists. I hope someone could help me with this.