3D PRINT EXPRESS | 3D printing up to 50% less time

AcadVersion · Post by **AcadVersion** » Sun May 14, 2017 9:07 am

For all "makers" and interested in 3D printing. Print up to 50% less time with your 3D printer.

https://www.kickstarter.com/projects/76 ... d-printing

*More information about the project in the link.

soniaspring · Post by **soniaspring** » Sat Mar 24, 2018 12:10 am

Click here --- https://prime-resume.com/blog/job-searc ... cial-media if you need help with writing resume

Jarda3d · Post by **Jarda3d** » Tue Apr 02, 2019 4:51 pm

Use Slic3r.org, it have adaptive layers. Great for general and vase printung in accelerated speeds.

BTW, the most of printing time is not printing moves (except vase and simple large pieces), but non-print moves and retractions. I was play with printing speeds up to 160mm/s (with my A10M), but it save time like that with little worse surface finish.

30 mins... 20 min
3h 35m ... 3h 25m

So more speed did not have such effect, if you add about 15-17 mins to preheat for ABS.

If you want to speed-up print a lot, use direct driven extruder, where could be retractions very limited and printing speed could go up freely.

Jarda3d · Post by **Jarda3d** » Wed Apr 17, 2019 5:03 pm

See my A10M profile. Printing time reduced substantially

Xarlina · Post by **Xarlina** » Fri Apr 19, 2019 6:37 pm

A week ago our colleague brought to our office 5 cool models which he printed on a 3D printer. It`s a very cool machine and if we can do the models faster that`s really exciting)

Geeetech

3D PRINT EXPRESS | 3D printing up to 50% less time

3D PRINT EXPRESS | 3D printing up to 50% less time

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time