prints circle as polygon

panzo · Post by **panzo** » Fri Sep 01, 2017 4:10 am

hey does anyone experience the following problem my i3 prints circle as polygon

Newopint95 · Post by **Newopint95** » Fri Sep 01, 2017 7:12 am

do you have a picture of your print?

panzo · Post by **panzo** » Fri Sep 01, 2017 4:10 pm

yes is the printed item of the photo from the following file from thingiverse

https://www.thingiverse.com/thing:2263762

: polugon.PNG (247.5 KiB) Viewed 12335 times

Newopint95 · Post by **Newopint95** » Sat Sep 02, 2017 4:34 am

can you send me the gcode you used? the problem may be the .stl not your printer.

do you know what the settings are on your printer? speed, steps per mm for x and y, etc.
does this happen with all circles?

try printing this quick test print and see what you get.
https://www.thingiverse.com/thing:1023717

panzo · Post by **panzo** » Sun Sep 03, 2017 2:12 pm

same and in this file..... circle sliced as polygon
bellow you can find gcode

https://www.dropbox.com/s/rjizi7tv8k04n ... e.rtf?dl=0

is there any other software that can communicate with my printer via usb?

panzo · Post by **panzo** » Sun Sep 10, 2017 7:49 am

problem solved it was the mac application faulty i have slice it in windows and everything is ok

Geeetech

prints circle as polygon

prints circle as polygon

Re: prints circle as polygon

Re: prints circle as polygon

Re: prints circle as polygon

Re: prints circle as polygon

Re: prints circle as polygon