Repetier-Host setting on ABS print

Post Reply
Linakesh
Posts: 9
Joined: Tue Jun 15, 2021 6:24 am

Repetier-Host setting on ABS print

Post by Linakesh » Mon Oct 04, 2021 11:04 pm

Same as PLA except temperatures.
https://100001.onl/ https://1921681254.mx/
Hotend first 258, then 250 for green, yellow, white, or 245 for gray, red, blue, black
Hotbed first 110 (120 if you can), then 110.
Top
Post Reply

Return to “Software”