Geeetech

Hi,
I need the source code for the firmware (Marlin version 1.0.05) of the Geeetech i3 Pro W.
I tried searching in the topic dedicated to firmwares on the forum, but the latest version I found was the 1.0.2, that is quite old, and that topic is locked by now.
I also looked in the Pro W page of the main Geeetech site (https://www.geeetech.com/download.html?download_id=36), but there is only the binary HEX version of the firmware v1.0.05, no source code.
Could someone provide the source code of this version (1.0.05)? I made changes to physical axes dimensions and need to change Configuration.h and recompile.
Thank you

Hello, the forum uploaded is the latest version, you can modify it on the basis of version 1.0.02, version 1.0.05 is the same as before.

Hi, 1.0.5 it's very very old, at the I3 Pro B forum you have the last marlin for I3 Pro B/W (2.0.6).

Best regards.

William wrote: ↑

Fri Aug 28, 2020 3:08 pm

Hello, the forum uploaded is the latest version, you can modify it on the basis of version 1.0.02, version 1.0.05 is the same as before.

Well, I tought there was some bugfix in 1.0.5 that is not present in 1.0.2, but to be honest I just started tinkering with the printer and I'm not very familiar with firmware versions.
Thanks.

LoBoHEAT wrote: ↑

Fri Aug 28, 2020 7:24 pm

Hi, 1.0.5 it's very very old, at the I3 Pro B forum you have the last marlin for I3 Pro B/W (2.0.6).

Best regards.

Are the parameters of Configuration.h the same for pro B and pro W? I just need to change one parameter, X axis length, and it would be great not to have to change other parameters that I don't know

fb9 wrote: ↑

Fri Aug 28, 2020 11:16 pm

LoBoHEAT wrote: ↑

Fri Aug 28, 2020 7:24 pm

Hi, 1.0.5 it's very very old, at the I3 Pro B forum you have the last marlin for I3 Pro B/W (2.0.6).

Best regards.

Are the parameters of Configuration.h the same for pro B and pro W? I just need to change one parameter, X axis length, and it would be great not to have to change other parameters that I don't know

Are the same printer, W is wood frame B is acrylic frame.

Best regards