G2S Pro Firmware Issue.
Posted: Wed Mar 13, 2019 9:17 pm
I apologise in advance if I have missed a previous post on this issue.
I have a newly built G2s Pro/3 in i control box combination that I wish to apply the latest supported firmware to (which i believe to be 1.0.04). The issue I am finding is that it would appear 1.0.04 is only accessible via Easyprint 3D and the firmware itself does not support the 12864 display of the control box. Is this version of the firmware available uncompiled so the display can be changed or is 1.0.3 the only option?
Alternatively, is there any intention to support printers that use a 3 in 1 control box when selecting a printer in Easyprint (for firmware update purposes)?
I have a newly built G2s Pro/3 in i control box combination that I wish to apply the latest supported firmware to (which i believe to be 1.0.04). The issue I am finding is that it would appear 1.0.04 is only accessible via Easyprint 3D and the firmware itself does not support the 12864 display of the control box. Is this version of the firmware available uncompiled so the display can be changed or is 1.0.3 the only option?
Alternatively, is there any intention to support printers that use a 3 in 1 control box when selecting a printer in Easyprint (for firmware update purposes)?