Page 1 of 1
A10 Old firmware version V1.0.04
Posted: Sat Feb 23, 2019 7:55 am
by GP70
Hi everybody,
I've upgraded my A10 with firmware 1.1.8 (from Geeetech) but I would like to check some configuration differences between the stock firmware V1.0.04 and the new one: has any one the V1.0.04 source code?
Thanks in advance!
Re: A10 Old firmware version V1.0.04
Posted: Fri Apr 12, 2019 11:48 am
by William
The old version of A10 firmware is the V1.0.4.
But it is based on the GT2560VB board.
- A10.zip
- (428.8 KiB) Downloaded 386 times
Re: A10 Old firmware version V1.0.04
Posted: Sun Apr 21, 2019 6:16 am
by GP70
Great!!!
Thank u very mach William!
My A10 has GT2560VB so it is really what I need!
In case do you know which version of Arduino IDE is compatible to compile?
Re: A10 Old firmware version V1.0.04
Posted: Mon Apr 22, 2019 1:59 pm
by Tomyuan
I've checked the fw and it should be the old version fw.
I can use the IDE 1.0.1 compline it.
Re: A10 Old firmware version V1.0.04
Posted: Mon Apr 29, 2019 6:03 am
by GP70
Thanks!
I will try with that version!
Re: A10 Old firmware version V1.0.04
Posted: Fri May 31, 2019 6:15 am
by GP70
Guys,
I'm back with a question about firmware 1.1.8 (and I think also the 1.1.9) which bring you back in home screen when you are in any of the menu position (Eg. to set some parameters) and you don't act on knob or button for few seconds: is there a sort of timeout? I was not able to find a #define setting to disable it...
Anyone can help?
Thanks!
Re: A10 Old firmware version V1.0.04
Posted: Wed Jun 12, 2019 6:09 am
by GP70
Thanks vert!