problem firmware prusa i3 pro w
Posted: Thu Jan 11, 2018 7:57 pm
Arduino: 1.8.5 (Windows 10), Board:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\merte\Downloads\Marlin-PI3_Pro_B\Marlin-PI3_Pro_B\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Dit rapport zou meer informatie bevatten met
"Uitgebreide uitvoer weergeven tijden compilatie"
optie aan in Bestand -> Voorkeuren.
how do i solve this ?
In file included from sketch\Marlin.h:23:0,
from sketch\BlinkM.cpp:5:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\ConfigurationStore.cpp:1:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:792,
from C:\Users\merte\Downloads\Marlin-PI3_Pro_B\Marlin-PI3_Pro_B\Marlin\Marlin.ino:33:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\MarlinSerial.cpp:23:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:30:
sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined
#define X_MAX_PIN -1
^
sketch\pins.h:1363:0: note: this is the location of the previous definition
#define X_MAX_PIN 24
^
sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined
#define Y_MAX_PIN -1
^
sketch\pins.h:1369:0: note: this is the location of the previous definition
#define Y_MAX_PIN 28
^
sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined
#define Z_MAX_PIN -1
^
sketch\pins.h:1375:0: note: this is the location of the previous definition
#define Z_MAX_PIN 32
^
sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:44:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:30:
c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Dit rapport zou meer informatie bevatten met
"Uitgebreide uitvoer weergeven tijden compilatie"
optie aan in Bestand -> Voorkeuren.
how do i solve this ?