Page 1 of 1
Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Thu Jun 15, 2017 11:41 pm
by xev
Hello,
Where find firmware for Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch ?
Thanks for your awnser
Regards
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Fri Jun 16, 2017 2:06 pm
by William
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Fri Jun 16, 2017 11:01 pm
by xev
Thanks !
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Mon Jun 19, 2017 5:32 pm
by marquis
I'm having trouble with this firmware my printer won't home now
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Mon Jun 19, 2017 5:33 pm
by marquis
xev wrote: ↑Fri Jun 16, 2017 11:01 pm
Thanks !
Did this work for you?
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Mon Jun 19, 2017 5:34 pm
by marquis
William wrote: ↑Fri Jun 16, 2017 2:06 pm
Hi,here is the firmware.Marlin-PI3_Pro_B_3DTouch.zip
I'm having trouble with this firmware my printer won't home now
Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch
Posted: Thu Jun 22, 2017 5:38 pm
by William
marquis wrote: ↑Mon Jun 19, 2017 5:34 pm
William wrote: ↑Fri Jun 16, 2017 2:06 pm
Hi,here is the firmware.Marlin-PI3_Pro_B_3DTouch.zip
I'm having trouble with this firmware my printer won't home now
The firmware you download is for GT2560 A.
So for your A+, you should modify the parameters
SERVO0_PIN in pins.h file.
A
nd it should be: #define SERVO0_PIN 11