Page 1 of 1
Problem with i3b
Posted: Sun Sep 04, 2016 5:40 pm
by napoli86
Hello guys..
I bought a i3b pro and tried to install I marlin firmware here on the forum , but the engines now run -up ... I also tried to put ramps as 1.4 firmware but LCD 's wrong .. someone owns the original firmware
Re: Problem with i3b
Posted: Mon Sep 05, 2016 11:01 am
by William
Hi,
Did you download the firmware for Pro B from here:
http://www.geeetech.com/forum/viewtopic ... 20&t=17046
And what version is your Arduino?I saw you say you met some errors in Arduino,can you show more details about it?
Re: Problem with i3b
Posted: Mon Sep 05, 2016 1:54 pm
by napoli86
Yes i download firmware i3b pro in this forum.
I resolved error but dont work.. gt 2560
Re: Problem with i3b
Posted: Mon Sep 05, 2016 3:37 pm
by William
But how?You upload it successfully and the printer still didn't work?More details would be appreciated.
Re: Problem with i3b
Posted: Mon Sep 05, 2016 3:55 pm
by napoli86
Yes... i try all firmware.. but the motor don t move.. i use arduino 1.0.6
Re: Problem with i3b
Posted: Mon Sep 05, 2016 5:00 pm
by William
Re: Problem with i3b
Posted: Mon Sep 05, 2016 5:14 pm
by napoli86
The firmware i charge.. but the motor don t work , the heatbed dont work.. only extrusor work.
I think gt 2560 is broken