Issues with Marlin Home settings
Posted: Wed Aug 31, 2016 9:37 pm
Hi all,
Trying to configure my Geeetech GT2560 board on my Prusa I3 but having major problems.
Firmware is loaded onto the board but when I home and check the current position with GCode M114 I get:
Compiled: Aug 31 2016
echo: Free Memory: 3970 PlannerBufferBytes: 1232
echo:Stored settings retrieved
>>> m114
SENDING:M114
echo:SD card ok
X:0.00 Y:0.00 Z:0.00 E:0.00 Count X: 0.00 Y:0.00 Z:0.00
>>> m114
SENDING:M114
X:-186.00 Y:-224.00 Z:0.00 E:0.00 Count X: -186.00 Y:-224.00 Z:0.00
and I cant use G92 to re-set the values to 0 for X or Y, but does work on Z and E.
Thanks in advance
Chris
Trying to configure my Geeetech GT2560 board on my Prusa I3 but having major problems.
Firmware is loaded onto the board but when I home and check the current position with GCode M114 I get:
Compiled: Aug 31 2016
echo: Free Memory: 3970 PlannerBufferBytes: 1232
echo:Stored settings retrieved
>>> m114
SENDING:M114
echo:SD card ok
X:0.00 Y:0.00 Z:0.00 E:0.00 Count X: 0.00 Y:0.00 Z:0.00
>>> m114
SENDING:M114
X:-186.00 Y:-224.00 Z:0.00 E:0.00 Count X: -186.00 Y:-224.00 Z:0.00
and I cant use G92 to re-set the values to 0 for X or Y, but does work on Z and E.
Thanks in advance
Chris