Page 1 of 1
Printing is mirrored
Posted: Sat Jul 30, 2016 2:26 pm
by Whatever
I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
Re: Printing is mirrored
Posted: Sat Jul 30, 2016 3:20 pm
by William
Whatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
Hi,Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
Re: Printing is mirrored
Posted: Sun Jul 31, 2016 2:32 pm
by Whatever
William Kwok wrote:Whatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
Hi,Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
Hi quick update my main control board is Sanguinoioiu +4a4988 I have tried to find the firmware to upload to printer with no luck - I am running the latest ardino have tried all the firmwares for i3 Illuminum on suggested link, still not uploading - thanks for any help.
Re: Printing is mirrored
Posted: Mon Aug 01, 2016 9:42 am
by William
Whatever wrote:William Kwok wrote:Whatever wrote:I know this topic has probably been done to death on here before. I have the GeeTech Illuminium i3 and when I start up a print I believe it is my x-axis home is reversed and my actual prints - if they are detailed IE - a box for Raspberry PI 3 eveything is reversed. I have looked for the aurduno update - cant seem to find it - Love my printer but this is getting quite frustrating - any directional help will be appreciated.
Cheers
Ian
Hi,Ian
You mean your X motor had a wrong direction?Here you can modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
Hi quick update my main control board is Sanguinoioiu +4a4988 I have tried to find the firmware to upload to printer with no luck - I am running the latest ardino have tried all the firmwares for i3 Illuminum on suggested link, still not uploading - thanks for any help.
Hi,
There are too many unexpected errors in the lastest Arduino IDE,you can try an earlier version like 1.0.1,download it from here:
http://www.geeetech.com/wiki/index.php/ ... _Resources