Page 1 of 1
Need firmware an settings
Posted: Wed Aug 19, 2015 11:31 am
by mastercaster
Needs working copy of firmware for getech prusa i3 x with settings to get a working firmware for board atmega 2560 thanks in advance
Re: Need firmware an settings
Posted: Wed Aug 19, 2015 3:58 pm
by Mark
Here it is.
Re: Need firmware an settings
Posted: Fri Aug 28, 2015 10:10 am
by knuggle
Hello, I purchased a Geeetech Latest Unassembled Acrylic I3 Pro C dual extruder MK8 3D printer DIY and am having problems with the original firmware. Can you please send me this and a basic instruction on how to reinstall. Thank you
Y
Re: Need firmware an settings
Posted: Fri Aug 28, 2015 5:37 pm
by Mark
reburn the firmware as the pic shows:
Re: Need firmware an settings
Posted: Mon Aug 31, 2015 1:49 pm
by Jacques
Hi there,
I'm looking for firmware for i3 Pro B with Mega2560 + Ramps 1.4. Can you please upload here.
Re: Need firmware an settings
Posted: Mon Aug 31, 2015 3:54 pm
by Mark
Do you mean GT2560?
Re: Need firmware an settings
Posted: Wed Sep 02, 2015 4:49 am
by Jacques
@Mark, sorry for only replying. I stripped the PC board and it is a Iduino Mega R3 with Ramps 1.4.
Re: Need firmware an settings
Posted: Wed Sep 02, 2015 10:16 am
by Mark
Then this firmware is what you want.