Geeetech

Posted: **Thu Aug 06, 2015 8:08 am**

i got a Geeetech Dual Extruder Prusa i3 pro C
and i dont get the Extruder to work propper i need to hand feed the filament to get a calabration cube if i dont hand feed the filament i will get a cone insted of a cube.
an i got a gt2560 bord

1) Which firmware do i need ?
2) wher do i download ?
3) dont know what nossel i got it says 2-0 on it. is that 0.5 ore 0.2 in the settings
pls help

Posted: **Thu Aug 06, 2015 2:39 pm**

hi ,the firmware is already sent to your email,please check it.
The I3 pro C nozzle has following diameters: 0.3mm, 0.35mm, 0.4 mm, 0.5mm,you can clean your nozzle and check it carefully on it.

Posted: **Sun Aug 09, 2015 4:24 am**

Hi Mark.
I got a Geeetech Dual Extruder Prusa i3 pro C too.
Can you send me a firmware copy?
Thanks

Posted: **Mon Aug 10, 2015 11:32 am**

Re: firmware for Dual Extruder i3 pro C

UNREAD_POST由 Nacho_MX » 周日 8月 09, 2015 4:24 am
Hi Mark.
I got a Geeetech Dual Extruder Prusa i3 pro C too.
Can you send me a firmware copy?
Thanks

the firmware has already been sent to your emailbox, please check it.

Posted: **Wed Aug 12, 2015 3:05 am**

I also need a copy of the firmware for the prusa i3 pro c. If someone could send me copy that would be great. Right now Im dead in the water. Thank you.

Posted: **Wed Aug 12, 2015 4:00 am**

I also have a Geeetech Dual extruder Prusa i3 pro c with a gt2560 board. Can I get the firmware emailed to me also? My email is angelr5@comcast.net. Thank you

Posted: **Wed Aug 12, 2015 8:50 am**

Hello guys, I've already sent it to your mailbox, plz check your email!
The attachment is the firmware of Marlin_GT2560-PI3_Pro_C ,if anyone else wants, plz download it here!

Posted: **Fri Aug 28, 2015 10:22 am**

I tried to upload a copy of this firmware and it has errors. Can you email me another copy. I have a Geeetech Latest Unassembled Acrylic I3 Pro C dual extruder MK8 3D printer DIY. My email is dalesloan@live.com Thank you

Posted: **Fri Aug 28, 2015 12:06 pm**

Hello Mark, I have tried to install the firmware you have posted and have had no sucess in installing it. Can you email me a new version @ dalesloan@live.com Thanks I have a dual head Acrylic I3 C

Posted: **Fri Aug 28, 2015 12:09 pm**

Hello Mark, I have tried to install the firmware you have posted and have had no sucess in installing it. Can you email me a new version @ dalesloan@live.com Thanks I have a dual head Acrylic I3 C