Uploading firmware- Does printer have to be on or is USB eno

Post Reply
XYZM
Posts: 46
Joined: Tue Apr 28, 2015 12:36 am

Uploading firmware- Does printer have to be on or is USB eno

Post by XYZM » Sun May 31, 2015 11:26 pm

Is USB enough to upload the firmware.

When I tried with the printer switch on, the motors started making noises that would not stop.

And roughly how long does it take to upload the firmware. Its going on nearly 10 minutes.
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Uploading firmware- Does printer have to be on or is USB

Post by zhangxueyou » Mon Jun 01, 2015 8:56 am

Yes, it's enough to upload the firmware with only USB cable. The power from computer is enough to do that.
Top
XYZM
Posts: 46
Joined: Tue Apr 28, 2015 12:36 am

Re: Uploading firmware- Does printer have to be on or is USB

Post by XYZM » Mon Jun 01, 2015 8:57 am

ok. Thank you for answering :D
Top
Post Reply

Return to “Firmware”