How to upload the firmware to Sanguinololu

[William]

Maybe you need to replace a new motherboard.

[Matrixer]

Hello!
I tried to install the firmware for my new I3 Aluminium but in the folder "sanguino" is no *.ino file like in the description viewtopic.php?f=13&t=17181
Can u help me?
thx

[capnjack]

is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software

[William]

is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software

The steps of uploading fw to your printer:

1. Install the drivers for it(Check your usb chip at first.If you are using the WIN10 then you can install the drivers on device manager)
2. Then download the fw for your printer and extract it
   Download the "U8glib.zip" files from :arduino.cc
3. Open the"configuration.h" file and check the fw version
   (For the version 1.02~1.04,you can upload it via Arduino 1.0.1)
   (For the version 1.1.4~1.1.9,you can upload it via Arduino 1.8.5)
4. Install the correct version arduino IDE in your printer
5. Open the arduino ide and import the "U8glib.zip"to library
6. File>open>click"Marlin.ino"
7. Choose the board type then correct "COM"port
8. Clcick upload
9. Wating it finished and enjoy it.