Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

xev · Post by **xev** » Thu Jun 15, 2017 11:41 pm

Hello,

Where find firmware for Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch ?

Thanks for your awnser

Regards

Post by **William** » Fri Jun 16, 2017 2:06 pm

Hi,here is the firmware.

Marlin-PI3_Pro_B_3DTouch.zip: (323.92 KiB) Downloaded 1807 times

xev · Post by **xev** » Fri Jun 16, 2017 11:01 pm

Thanks !

marquis · Post by **marquis** » Mon Jun 19, 2017 5:32 pm

I'm having trouble with this firmware my printer won't home now

marquis · Post by **marquis** » Mon Jun 19, 2017 5:33 pm

xev wrote: ↑
Fri Jun 16, 2017 11:01 pm
Thanks !

Did this work for you?

marquis · Post by **marquis** » Mon Jun 19, 2017 5:34 pm

William wrote: ↑
Fri Jun 16, 2017 2:06 pm
Hi,here is the firmware.Marlin-PI3_Pro_B_3DTouch.zip

I'm having trouble with this firmware my printer won't home now

Post by **William** » Thu Jun 22, 2017 5:38 pm

marquis wrote: ↑
Mon Jun 19, 2017 5:34 pm

William wrote: ↑
Fri Jun 16, 2017 2:06 pm
Hi,here is the firmware.Marlin-PI3_Pro_B_3DTouch.zip
I'm having trouble with this firmware my printer won't home now

The firmware you download is for GT2560 A.
So for your A+, you should modify the parameters SERVO0_PIN in pins.h file.
And it should be: #define SERVO0_PIN 11

Geeetech

Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch

Re: Firmware Geeetech Prusa I3 Pro B and GT2560 REV A+ with 3Dtouch