Rostock 301 firmware at 1.0.03 delta radius issue

davegalesr · Post by **davegalesr** » Fri Apr 28, 2017 1:45 am

I upgraded my firmware on my Rostock 301 to 1.0.03 and I do not see any effect when I change the delta radius value - the distance between the hotend and the bed does not change.

Post by **William** » Fri Apr 28, 2017 10:14 am

davegalesr wrote:I upgraded my firmware on my Rostock 301 to 1.0.03 and I do not see any effect when I change the delta radius value - the distance between the hotend and the bed does not change.

Hi,How do you upgrade the firmware?Maybe you can use EasyPrint to do that:http://www.geeetech.com/specialpage/software/.Besides,taking a video will be more clear to solved it.

davegalesr · Post by **davegalesr** » Sun Apr 30, 2017 10:32 pm

I used Easy Print to update the firmware and that's when the delta radius stopped working. how can I revert back to 1.0.02?

Post by **William** » Tue May 02, 2017 8:28 am

Hi,you can do that by following this post.http://www.geeetech.com/forum/viewtopic ... 20&t=18167

Geeetech

Rostock 301 firmware at 1.0.03 delta radius issue

Rostock 301 firmware at 1.0.03 delta radius issue

Re: Rostock 301 firmware at 1.0.03 delta radius issue

Re: Rostock 301 firmware at 1.0.03 delta radius issue

Re: Rostock 301 firmware at 1.0.03 delta radius issue