Hi,
Recently I bought a Geeetech PRO C, and the printer comes with a dual extruder pre-mounted, and in my first try to print with the 2 extruders, I try to level the bed, but the distance of each extruder to the bed is different.
I already try to put the extruders on same distance but the printing don´t work well.
So I ask if anyone can help with some advise to put the extruders on right position.
Many Thanks.
Problems with leveling extruders of Geeetech PRO C
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Problems with leveling extruders of Geeetech PRO C
Same distance is not enough. The distance between hotbed and nozzle should be near enough. No gap between lines when printing is the best.