Cheap extrusion feeding

Post Reply
noneoneisb
Posts: 4
Joined: Sat Feb 20, 2016 9:01 pm

Cheap extrusion feeding

Post by noneoneisb » Thu Feb 25, 2016 7:08 am

Hi!
Can someone help to fix this problems? I'm printing PLA
I already tried (and failed) with:
1- set extruded rate fro 100% to 120% (but nothing change)
2- remove retraction
3- testing different temperatures in noozle and bed

It seems a low feedrate ratio but I'm not sure.

Thank you for help :roll:
Attachments
image.jpeg
image.jpeg (164.48 KiB) Viewed 8155 times
image.jpeg
image.jpeg (379.87 KiB) Viewed 8155 times
Top
Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: Cheap extrusion feeding

Post by Sherry » Thu Feb 25, 2016 2:33 pm

hi, how much diameter of filament, nozzle do you use? did you set them correctly in repetier host and slice3r?
Top
noneoneisb
Posts: 4
Joined: Sat Feb 20, 2016 9:01 pm

Re: Cheap extrusion feeding

Post by noneoneisb » Thu Feb 25, 2016 2:45 pm

1.75 filament diameter, 0.30 noozle.
Yes, i checked all software settings, and they are still correct and feeder driver too.
Top
Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: Cheap extrusion feeding

Post by Sherry » Thu Feb 25, 2016 2:53 pm

noneoneisb wrote:1.75 filament diameter, 0.30 noozle.
Yes, i checked all software settings, and they are still correct and feeder driver too.
please send me the slice configration. btw, what's the printer type?
Top
Post Reply

Return to “Extruder”