Problem with Min temp and nozzle not heating up

Post Reply
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Problem with Min temp and nozzle not heating up

Post by zhangxueyou » Tue May 19, 2015 11:00 am

You can test the resistance on the 2 ends of heating wires.
QQ图片20150515094750.jpg
QQ图片20150515094750.jpg (43.95 KiB) Viewed 2623 times
Top
Post Reply

Return to “Extruder”