Geeetech

Can anyone provide the basic dimensions for the v4.0 GT2560? Specifically, the board's overall perimeter and mounting hole dimensions.

I want to develop an external case. I'd measure the one in my A10, but I just got it dialed back in after adding a direct drive extruder.

Thanks,

Randy

will probably be modelling my board in fusion360 later, ill let you know the dimensions if/when i do

quickly measuring the overall dimensions with my callipers its 100.10x130.4
the highest point (hotbed mosfet) is 23.2 including the board itself and the solder point for said mosfet, so this would be the overall height