Geeetech

Hello!
I am having problems with the leveling of the printer and I do not find who can help me.
I have followed all the instructions in the manual, I have leveled successfully but when printing it makes a bow with respect to the central point of more than 15mm, besides that nothing plastic comes out, it seems that the extruder motors do not push the filament enough.
I would greatly appreciate your help.
Thank you!

Hola!
Estoy teniendo problemas con la nivelación de la impresora y no encuentro quien me pueda ayudar.
He seguido todas las instrucciones del manual, he nivelado con éxito pero al imprimir me hace un arco respecto al punto central de más de 15mm, además que no sale nada de plástico, parece que los motores del extrusor no empujan lo suficiente al filamento.
Os agradecería mucho vuestra ayuda.
Gracias!

Hi,As to the leveling,ould you take a video to show more detail about your leveling result?
As to the extruder,you can disassemble the fan of extrduder to check if it works normally.Also you can refer to this post:http://www.geeetech.com/forum/viewtopic ... 19&t=17097.

Thanks you William!
This is the video:
https://youtu.be/EWMakT-e9y4

Regards