Fan connections

Post Reply
tassat01
Posts: 38
Joined: Fri Jun 10, 2016 9:59 pm

Fan connections

Post by tassat01 » Sun Jun 12, 2016 12:30 pm

Hi there,

Can someone tell me the connection for the extruder fan and the controller fan that's mounted next to the controller.

Is the extruder fan in number 3 and controller fan number 1. Just so I can be sure mines correct.

Pete
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fan connections

Post by William » Mon Jun 13, 2016 10:32 am

tassat01 wrote:Hi there,

Can someone tell me the connection for the extruder fan and the controller fan that's mounted next to the controller.

Is the extruder fan in number 3 and controller fan number 1. Just so I can be sure mines correct.

Pete
Hi,Pete
These fan connectors on the motherboard are generic and can be freely inserted.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
tassat01
Posts: 38
Joined: Fri Jun 10, 2016 9:59 pm

Re: Fan connections

Post by tassat01 » Mon Jun 13, 2016 10:40 am

Thanks for the info. What is the PWM-fan input
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fan connections

Post by William » Mon Jun 13, 2016 11:33 am

tassat01 wrote:Thanks for the info. What is the PWM-fan input
That's it:
Attachments
QQ截图20160613113315.png
QQ截图20160613113315.png (636.71 KiB) Viewed 9517 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
tassat01
Posts: 38
Joined: Fri Jun 10, 2016 9:59 pm

Re: Fan connections

Post by tassat01 » Thu Jun 23, 2016 9:39 am

What is the function of pwm fan output. What is connected to this.
Top
Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: Fan connections

Post by Toy » Thu Jun 23, 2016 9:57 am

tassat01 wrote:What is the function of pwm fan output. What is connected to this.
PWM fan can be controled by repetier-host, you can connect any of your fan into it.
Top
risoo
Posts: 2
Joined: Sat Jun 25, 2016 9:39 pm

Re: Fan connections

Post by risoo » Sat Jun 25, 2016 9:59 pm

hello
i put fan conektor to +- pwm pin and fan is still working ... in pc is settings 0% on fan.

i can control fan to 100% but 0% on settings in rephost does not mean 0% on fan.
Top
Post Reply

Return to “Control Board”