Geeetech i3 pro w printing problem

Vin00 · Post by **Vin00** » Thu Feb 01, 2018 5:26 pm

Hi, i am new on this site, sorry for my english i am italian and i not speck english very well.
I have a problem whit the geeetech i3 pro w, when i attempt to print and the extrusor go in position, in the lcd appears a series of symbols, and tyhe printing doesn't continues. Anyone have the same problem?

Post by **William** » Fri Feb 02, 2018 5:43 pm

Could you upload the pic about what info shows on the LCD?
You can upload it to Google Drive and then attach the link to this post

Vin00 · Post by **Vin00** » Sat Feb 03, 2018 12:38 am

the link is this
https://drive.google.com/open?id=1ksKM3 ... PBz3JoDWqO_

Post by **William** » Sat Feb 03, 2018 2:19 pm

It seems your link not correct...

Vin00 · Post by **Vin00** » Sun Feb 04, 2018 5:49 pm

sorry i don't know why doesen't work, here you are the right link
https://drive.google.com/file/d/1ksKM3j ... sp=sharing

Post by **William** » Mon Feb 05, 2018 4:28 pm

You can try to test it
https://drive.google.com/open?id=1zt6Cv ... -EU1DRTUjT

Vin00 · Post by **Vin00** » Wed Feb 07, 2018 4:48 am

thanks for the help, the extension of the file are the problem, i fix him, thank you

Geeetech

Geeetech i3 pro w printing problem

Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem

Re: Geeetech i3 pro w printing problem