Have finally managed to get the printer working by changing to yet another hotend.
Yet although having set the minimum and maximum speed and steps to make it possible can not seem to get the printer to speed up printing by using the pot control while printing. What is the method or adjustment to make this possible.
Can not inccrease printing speed
Re: Can not inccrease printing speed
Hi,you can increase the value of printer setting in the Repetier Host to increase the printing speed according to your actual situtioni.
- Attachments
-
- 1.png (114.29 KiB) Viewed 4918 times
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Can not inccrease printing speed
Have tried that still does not work, even the firmware is et up correctly and has such values declared within it.
If the maximum printing speed stated in repetier host exceeds that set within the firmware would it by error not go beyond minimum?
If I am using the wrong pins file for the board will it cause the same error?
If the maximum printing speed stated in repetier host exceeds that set within the firmware would it by error not go beyond minimum?
If I am using the wrong pins file for the board will it cause the same error?