control board lost conector

[marce100]

i was buyed Drucken 5 Materialien Acryl Prusa I3 Pro B LCD MK8 DIY 3D Drucker

and the control board lost one conector, not becomes the conector for min sensor axis




tell me how i can fix it

[bang]

Hi,
You can refer to this post to exchange the pin assignment of X_min and X_max:
http://www.geeetech.com/forum/viewtopic ... 20&t=18020
Or you can solder the endstop cable on X_min slot if you have the skill...