Burned MotherBoard

Post Reply
Benni94
Posts: 10
Joined: Tue May 31, 2016 1:03 am

Re: Burned MotherBoard

Post by Benni94 » Fri Nov 18, 2016 9:58 pm

Hi,
i have the same problem on my M201.
The fuse IE10A has 24V, the fuse IE15A is dead.
Where can i get them? Can you send me?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Burned MotherBoard

Post by William » Sat Dec 03, 2016 3:44 pm

Benni94 wrote:Hi,
i have the same problem on my M201.
The fuse IE10A has 24V, the fuse IE15A is dead.
Where can i get them? Can you send me?
Hi,
The voltage we talked should be between every side of the fuse and GND,which means we have four 24V in total on the two fuses.
You can figure out which fuse is dead then contact your seller to talk about it.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Benni94
Posts: 10
Joined: Tue May 31, 2016 1:03 am

Re: Burned MotherBoard

Post by Benni94 » Wed Dec 07, 2016 3:40 pm

I figuered out, that the 24V fuse is dead, but i already found out which fuse to buy. Maybe you should write somewhere which fuses are used in the board, so other can find easily the right one ;)
Top
Post Reply

Return to “Control Board”