Y axis don't go home
Posted: Thu Feb 21, 2019 9:52 pm
Working fine in the past, there were no changes, now after starting the machine I have problems with the Y-axis. The y-axis is not going home, I have a Geeetech i3 with bord GT2560.
Manual movement by software and bed in the middle it is possible to move to both sides, and by home the bed is still in de middle.
By pushing the home on the printer, the y-axis moves a few steps in the wrong direction.
Manual movement by software and bed in the middle it is possible to move to both sides, and by home the bed is still in de middle.
By pushing the home on the printer, the y-axis moves a few steps in the wrong direction.