Geeetech

Here you can share you great ideas about hardware innovation. Here you can enjoy more professional and specialized services, Here is a platform for you to make a difference!
http://geeetech.net/forum/

X Axis moving only in one direction

http://geeetech.net/forum/viewtopic.php?f=17&t=17155

Page 1 of 1

X Axis moving only in one direction

Posted: Sat Nov 14, 2015 9:35 pm
by brisrascal
I have a problem with my x axis on my Me Creator moving only in one direction. I tried the following using the Repetier Host V1.5.6:

X Axis
X Axis endstop: Tried M119, found to be triggered and traced it to a disconnected lead (Fixed)

Y Axis
The Y axis movement stops in the middle of the printer. Does not seem to move beyond a set point of the machine.

Can you advise me as to how to resolve the problem?

Re: X Axis moving only in one direction

Posted: Mon Nov 16, 2015 6:04 pm
by Mark
the Y axis, is your printer settings correct?

Re: X Axis moving only in one direction

Posted: Mon Nov 16, 2015 7:34 pm
by brisrascal
Hi,

Isn't the heatbed 150 by 150? I have addressed the Y axis problem which is due to a disconnected endstop.

Re: X Axis moving only in one direction

Posted: Tue Nov 17, 2015 9:50 pm
by Mark
If your printer is prusa I3, then I remember it is 200*200.
All times are UTC+08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/