Geeetech

Posted: **Fri Jul 24, 2015 1:38 pm**

Hi all experts

My G2s able to move arm in all axis smoothly in medium speed but as G28 & G29 running in fast speed, Y-Motor or Timing belt start skipping or stuck ( (make aweful sound)) in fast or sudden moment especially G28 & G29 and cause G2 s loses its coordination & could not do proper Auto-leveling. Please give some advise if belt-tension or some other issue has causing problem. Please assist.

Thanks in advance

Posted: **Tue Jul 28, 2015 3:32 pm**

fotomickey wrote:Hi all experts

My G2s able to move arm in all axis smoothly in medium speed but as G28 & G29 running in fast speed, Y-Motor or Timing belt start skipping or stuck ( (make aweful sound)) in fast or sudden moment especially G28 & G29 and cause G2 s loses its coordination & could not do proper Auto-leveling. Please give some advise if belt-tension or some other issue has causing problem. Please assist.

Thanks in advance

hi,please reduce the travel feed rate.more information,please refer to following link.
http://www.geeetech.com/wiki/index.php/ ... _preparing

Posted: **Wed Jul 29, 2015 2:28 pm**

Thanks Eric, problem solved

Geeetech

G2 belt tension on XYZ motor

G2 belt tension on XYZ motor

Re: G2 belt tension on XYZ motor

Re: G2 belt tension on XYZ motor