I am trying to find pin4 PWM on the board. According to the spec there is "Extra PWM control for small fan or LEDs"
Can someone please tell me where it is. The schematic shows pin 44 as being brought out but I can't find it on the board.
Azteeg
Re: Azteeg
Hi,Mjolinor!
Sincerely sorry for the delay.And i am so sorry that I think there may be a problem with our spec.There is no "Extra PWM control for small fan or LEDs".But if you just want to connect a fan or LEDs with 12V,you can connect it to the jumper named POWER.
Best wishes to you!
-Star
Sincerely sorry for the delay.And i am so sorry that I think there may be a problem with our spec.There is no "Extra PWM control for small fan or LEDs".But if you just want to connect a fan or LEDs with 12V,you can connect it to the jumper named POWER.
Best wishes to you!
-Star
Re: Azteeg
I need it for a 21kHz PWM signal so it has to be pin4 as that is tied to the hardware timers within the Atmega.
You should indicate that your Azteeg is not the Azteeg shown on the net and that there are parts of the schematic missing.
You should indicate that your Azteeg is not the Azteeg shown on the net and that there are parts of the schematic missing.