Geeetech

Posted: **Wed Aug 23, 2017 4:38 pm**

Hello. Purchased my first printer (Geeetech i3 Pro B) and should be arriving in the next few days. I'd like to upgrade the Z axis leadscrews right away and I'm not sure the length I need to get for the Pro B. My understanding is they are 8mm but what length?

I was looking at these but maybe find some in steel.

http://www.ebay.com/itm/100mm-600mm-3D- ... cD6Zk3G3Ow

Would I need different couplers too?

Thank you!
Travis

Posted: **Thu Aug 24, 2017 4:33 pm**

You mean the pitch? The pitch is 1.25mm

Posted: **Fri Aug 25, 2017 7:23 am**

The length I need to buy to replace the current z axis rods.. such as 250mm, 300mm?

They sell them from 100mm to 600mm lengths.

Posted: **Fri Aug 25, 2017 7:36 am**

Just looked in the packing list on the site and it says 300mm.

Geeetech

Leadscrew length (Z Axis) for i3 Pro B?

Leadscrew length (Z Axis) for i3 Pro B?

Re: Leadscrew length (Z Axis) for i3 Pro B?

Re: Leadscrew length (Z Axis) for i3 Pro B?

Re: Leadscrew length (Z Axis) for i3 Pro B?