extruder number two extrude less than extruder # 1
Posted: Sat Mar 18, 2017 9:02 pm
Hello
I have calibrated the extraction length correctly for one extruder but the second one extrude less. is there another setting on top of that.
here is my setting #define DEFAULT_AXIS_STEPS_PER_UNIT {78.74,78.74,2560,107.95}
thank you
I have calibrated the extraction length correctly for one extruder but the second one extrude less. is there another setting on top of that.
here is my setting #define DEFAULT_AXIS_STEPS_PER_UNIT {78.74,78.74,2560,107.95}
thank you