Hi. Today i am tring to upload firmware on the board but when i plug the usb cable i notice that no led cames up...so i tried to check with a multimeter if there is voltage on board and no 5v as photo. What i have to do?
Regards,
GT2560 Rev A+ no voltage
-
shadowcaster
- Posts: 18
- Joined: Sun Jul 10, 2016 8:44 pm
GT2560 Rev A+ no voltage
- Attachments
-
- 1024meanchip.png (944.4 KiB) Viewed 8471 times
Re: GT2560 Rev A+ no voltage
You need give the power to the board first if you are using RevA+...
-
shadowcaster
- Posts: 18
- Joined: Sun Jul 10, 2016 8:44 pm
Re: GT2560 Rev A+ no voltage
Hi. I do it and worked. Thanks