Z-Axis Backlash

Post Reply
ChrisH90
Posts: 32
Joined: Fri Apr 05, 2019 1:18 am

Z-Axis Backlash

Post by ChrisH90 » Fri Oct 30, 2020 2:23 am

Dear all, I have the issue that I have a enourmous Backlash in Z Axis. I can move the Z-Glider for about 2mm up and down without moving the Stepper. Any ideas how to tighten the Z-Axis?

Brandon511
Posts: 1
Joined: Sun Jan 10, 2021 9:56 am

Re: Z-Axis Backlash

Post by Brandon511 » Sun Jan 10, 2021 10:00 am

Thanks For The Great ConTent Sir. I Will also shaer with my Friend & ones again Thanks a lot.
[https://customersurveyz.onl/www-tellgnc-com/]

Najeraa
Posts: 1
Joined: Fri Jan 22, 2021 7:33 pm

Re: Z-Axis Backlash

Post by Najeraa » Sat Jan 23, 2021 12:00 pm

ChrisH90 wrote:
Fri Oct 30, 2020 2:23 am
Dear all, I have the issue that I have a enourmous Backlash in Z Axis. I can move the Z-Glider for about 2mm up and down without moving the Stepper. Any ideas how to tighten the Z-Axis?
Tellpizzahut
the Z-Axis position on the control. If the difference is more than 0.0002" (0.005 mm), the backlash is too large.

Mathis17425
Posts: 1
Joined: Tue Feb 02, 2021 12:00 pm

Re: Z-Axis Backlash

Post by Mathis17425 » Tue Feb 02, 2021 12:04 pm

Thanks to this article I can learn more. Expand my knowledge crediblebhand abilities. Actually the article is very real.

nillwatson532
Posts: 1
Joined: Tue Apr 06, 2021 2:19 am

Re: Z-Axis Backlash

Post by nillwatson532 » Fri Dec 31, 2021 2:42 am

It is able to directly process STL files on the control board and show 3D preview of the printing model on the touch screen. It can directly print the model by clicking the quick slicing button.

It supports to transfer stl files via WiFi connection on the Web-control page, monitor status of printing and control printing by wireless remote, WiFi automatic matching, easy to connect.

DP200 uses a 2560x1440 2K HD UV Curing LCD to provide accurate printing with XY axis resolution of 0.00185inches / 0.04
Dual Z-axis linear guides improve the stability of Z axis, contributing to smooth surface and reconstruct more details for the prints.

Edward11
Posts: 1
Joined: Fri Feb 25, 2022 7:16 pm

Re: Z-Axis Backlash

Post by Edward11 » Fri Feb 25, 2022 7:19 pm

I prefer this blog because it has much more informative stuff.
Yellowstone Walker Red Plaid Cotton Jacket

Stevan
Posts: 1
Joined: Fri Aug 12, 2022 2:00 pm

How To get Free Coin Master spin's?

Post by Stevan » Fri Aug 12, 2022 2:04 pm

Basically coin master is a Viking village game. The main objective of the game is to collect 'Coins as possible. You can do this by spinning the wheel, and if you are lucky, you will win more Coins, or just go on this site to read how to get free coins? free spins for coin master

LoganVonRueden
Posts: 1
Joined: Thu Aug 18, 2022 12:06 pm

Re: Z-Axis Backlash

Post by LoganVonRueden » Thu Aug 18, 2022 12:13 pm

I can learn more now that I've read this article. Boost my knowledge, credibility, and skills. The article is actually extremely accurate. basketball stars

Post Reply