Geeetech

Hi there
How can you set the extruders individually.
Extruder 0 - 9.5 cm
Extruder 1 - 9.0cm
Extruder 2 - 7.5cm
If I only want to print with extruder 2, the printing will be very bad.

would be interested too.

I didnt find a clou how to fix this generally.

My Printer has E0 93mm, the others I didnt even measure

Every workshop starts with this calibration. I have a lot of stringing so I would like to have a basic guide for this Printer.

Kind regards


klusou

Hi, You can refer to this: https://mattshub.com/blog/2017/04/19/ex ... alibration
Calibrate the extruder.