Hi there
How can you set the extruders individually.
Extruder 0 - 9.5 cm
Extruder 1 - 9.0cm
Extruder 2 - 7.5cm
If I only want to print with extruder 2, the printing will be very bad.
Extruder A20T
Re: Extruder A20T
would be interested too.
I didnt find a clou how to fix this generally.
My Printer has E0 93mm, the others I didnt even measure
Every workshop starts with this calibration. I have a lot of stringing so I would like to have a basic guide for this Printer.
Kind regards
klusou
I didnt find a clou how to fix this generally.
My Printer has E0 93mm, the others I didnt even measure
Every workshop starts with this calibration. I have a lot of stringing so I would like to have a basic guide for this Printer.
Kind regards
klusou
Re: Extruder A20T
Hi, You can refer to this: https://mattshub.com/blog/2017/04/19/ex ... alibration
Calibrate the extruder.
Calibrate the extruder.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!