Extruder order
Posted: Thu Sep 09, 2021 3:31 am
Hi everyone, I recently bought an A20M. Today I did the assembly but it is not clear to me the order of the two extruders.
In some videos, looking at the machine from behind, extruder 0 (E0) must be on the left, while extruder 1 (E1) must be on the right.
Is this thing correct? I have seen this setting on some videos, but in many others the exact opposite. What should be the correct fit?10.0.0.0.1 192.168.1.254
In some videos, looking at the machine from behind, extruder 0 (E0) must be on the left, while extruder 1 (E1) must be on the right.
Is this thing correct? I have seen this setting on some videos, but in many others the exact opposite. What should be the correct fit?10.0.0.0.1 192.168.1.254