Geeetech A20M TEMPT TOO LOW

alibabakes5 · Post by **alibabakes5** » Tue Aug 04, 2020 10:07 am

Hey guys!

I'm very new to 3d printing. I assembled my new printer yesterday and did a test print (sample came with SD card) and everything was fine, result was imho very impressive (pics attached)

Now,when printing my first self-made model the printer suddenly stops with a warning "TEMP TOO LOW". Nozzle cools down from 200°C and thats it.

My settings are: PLA from Geeetech, bed temp 60°C, nozzle temp 200°C.

Has anyone an idea whats wrong here? Room temp is fine, just as yesterday.

Cheers.
https://19216811.cam/ https://1921681001.id/ https://jpgtopdf.onl/

saifaljanahi · Post by **saifaljanahi** » Fri Aug 21, 2020 10:36 pm

Why cura is the issue?

saifaljanahi · Post by **saifaljanahi** » Fri Aug 21, 2020 10:37 pm

minhraju wrote: ↑
Sat Aug 08, 2020 10:31 pm
I have the A20T and faced the same issue.

It was the "standby temperature" which was not the same as the print temperature. Just bump it up and all should be resolved.

Oh and am assuming you were using CURA as I was and that was the issue...

Why cura is the issue??

Geeetech

Geeetech A20M TEMPT TOO LOW

Geeetech A20M TEMPT TOO LOW

Re: Geeetech A20M TEMPT TOO LOW

Re: Geeetech A20M TEMPT TOO LOW