Geeetech

Posted: **Wed Jun 17, 2020 11:26 pm**

Hello,
I just bought a geeetech A20m and a 3D wifi module. I tried to install it with easyprint 3d on my iphone 7+ as recommended in the furnished manual (see picture) but I never managed to get the page which allow to scan the QR code of my printer so the printer is always oofline. So I can't change the baud rate. So I get the same trouble as Yvon. Can anyone help us? Thanks in advance, Brigitte

Posted: **Thu Jun 18, 2020 9:51 am**

Hi, you can try to bind the serial number directly.

Posted: **Thu Jun 18, 2020 2:58 pm**

Hello,
How can I do that? Thanks for your help.

Posted: **Fri Jun 19, 2020 9:47 am**

Hi, you can refer to this:

3D wifi module user manual.rar: (2.02 MiB) Downloaded 380 times

Posted: **Sat Jun 20, 2020 10:41 pm**

Hello. Thanks for the manual which is more related to my version of easyprint 3D. The problem is still the same as I never get the message successfully bound. My machine is always unbind and offline. Thanks for your help.

Posted: **Mon Jun 22, 2020 9:46 am**

Hi, you don't need to scan the code, you can click Manual and enter the serial number behind 3DWiFi to bind.

Geeetech

Problem with 3d wifi module, easyprint3d and Geeetech A20m

Problem with 3d wifi module, easyprint3d and Geeetech A20m

Re: Problem with 3d wifi module, easyprint3d and Geeetech A20m

Re: Problem with 3d wifi module, easyprint3d and Geeetech A20m

Re: Problem with 3d wifi module, easyprint3d and Geeetech A20m

Re: Problem with 3d wifi module, easyprint3d and Geeetech A20m

Re: Problem with 3d wifi module, easyprint3d and Geeetech A20m