Geeetech

Posted: **Thu May 21, 2020 2:04 am**

Hi,
I just bought the A20M and wanted to connect it to a Repetier-Server installation (on a Raspberry Pi4). I can see the printer but the server is telling me that there is no reasonable answer on the port. What can I do?
Thanks for a quick answer!

Posted: **Thu May 21, 2020 10:02 am**

Hi，it may be that you have not installed the driver, you can refer to this:viewtopic.php?f=21&t=60612&p=81974#p81974

Posted: **Tue Jun 02, 2020 5:53 am**

: Linux Driver CH341.png (3.44 KiB) Viewed 3910 times

Hi William,

thanks for Your reply.
It seams, that the driver is installed, I get the message from my Raspberry Pi4 =

: Linux Driver CH341.png (3.44 KiB) Viewed 3910 times

Posted: **Tue Jun 02, 2020 11:15 am**

Hi，did you choose the correct baud rate according to the manual?

Geeetech

A20M with Repetier-Server

A20M with Repetier-Server

Re: A20M with Repetier-Server

Re: A20M with Repetier-Server

Re: A20M with Repetier-Server